Mounting the bottom chimney panelling
–
Push the bottom chimney
panelling together with the glass
shelf from below over the hood
body. The writing for the control
panel must be located above the
opening for the control element in
the hood body.
–
Fasten the chimney panelling to
the hood body with two screws.
–
Insert the control element from
below through the opening in the
hood body into the bottom
chimney panelling.
–
The control element is held with
clips. Carefully push the element
into the holder until an audible
click confirms that it is sitting tight.
Installing the fume trap
–
Raise the fume trap and connect
the three cables for the lighting.
–
Then hold the fume trap under
the hood body so that the two
screw holes marked with a red
dot lie above one another.
–
Fasten the fume trap with three
screws.
Mounting the filter mesh
–
Screw the filter and filter mesh
under the hood again.
IKD 908.1
21
