24
Maintenance and Service
Energy saving
Knowing that you will not use the refrigerator for a longer period of
time:
•
Set the temperature control dial to „0” and unplug the ap plian ce.
•
Empty the appliance.
•
Clean and dry the freezer. Wash carefully all the accessories .
•
Leave the refrigerator door slightly open to prevent the chambers from getting
unpleasant smell.
Maintenance
•
Periodically, once or twice a year, use a vacuum cleaner to dust the evaporator
(black bars) located in the back of the freezer.
Before the cleaning, turn off the main swith (Phot.3(2)) and unplug the ap plian ce.
Make sure you do not da ma ge the electric wires, the protection boxes and the capillary
tube while cleaning.
•
You may come across small problems while using the freezer that you can
repair yourself.
•
By repairing yourself any problems except the ones listed in the table below
inevitably waives the guarantee rights.
•
Place the freezer away from heat sources (such as radiators and ovens (Phot. 5).
•
Make sure air can circulate freely around the freezer - do not block the ventilation grid
•
Defrost when there are ice deposits. Thick layer of ice hampers cold transition
to the food and increases electric energy consumption.
•
Keep the door open as shortly as possible when putting in or taking out food. The
shorter the time the less ice will deposit on the evaporator.
•
Storage of food in the freezer for periods shorter than suggested on page 9 allows
you to use lower settings of the freezer dial - „3” - „5”.
•
Adjust the dial setting to the degree the freezer is filled up to.
