EEB 6500.0
31
What to do if trouble occurs...
[
Repairs may only be carried out by a qualified technician!
You can deal with some problems that occur yourself. First check whether
there has been any operating error. Repairs during the guarantee period are
not free of charge, when they are caused by operating errors or non-
observance of the following instructions:
Replacing the oven lamp
[
Caution: Danger of electric shock!
Before you open the cover of the
oven lamp the appliance has to be disconnected from the electricity
supply: Switch off the fuse or pull out the mains plug!
[
The lamps become very hot after being in use for some time. Therefore,
the lamps should be changed when they have cooled down!
Type: 25 W, 230/240 V, socket: E14
Important:
temperature resistant up to 300 °C!
You can obtain these lamps from KÜPPERSBUSCH customer service or from
your dealer.
Changing the light bulb:
– Unscrew the shelf rack.
– Carefully lever out the glass
cover with a screwdriver.
– Remove the damaged light
bulb and put the new one in.
– Reinstall the glass cover.
Replacing the door sealing
[
Do not use the oven with damaged or missing door sealing!
If the sealing is damaged or cannot be cleaned anymore it has to be replaced.
You can obtain a new sealing from KÜPPERSBUSCH customer service.
Removing the sealing
– To remove the sealing gently pull
each corner out.
Fitting the new sealing
– Clasp one corner after the other into the oven front.
Take care not to deform the hooks!
Rating label
Always indicate the data provided on the rating label when calling in customer
service or ordering spare parts.
The rating label for the oven is located on the
right-hand side strip and is visible when the
oven door is open.
– Make a note of this information in case you
have to consult our customer service.
Fault
Cause
Remedy
Not possible to switch off the
oven.
Electronic component
defective.
Disconnect fuse, call
customer service.
Oven does not heat up.
Fuse defective.
Check and replace fuse, if
necessary.
Is the mains plug in
the wall socket?
Plug the mains plug into the
wall socket
Oven temperature
control or mode
selector has not been
switched on.
Set oven temperature control
or mode selector as required.
Electronic timer
flashing – the clock
has not yet been set.
Set the clock. See page 21.
Oven light no longer works.
Lighting defective.
Replace the oven lamp.
Glass of oven door broken.
Switch off the appliance,
call customer service.
Door sealing damaged.
Replace the door sealing.
Strong smells from oven in
spite of ökotherm
®
catalyst.
ökotherm
®
catalyst
must be regenerated.
Heat the empty oven by
intensive hot air convection
at 275 °C for 60 min.
Strong vinegar smell when
preparing.
Baking with sour
dough or with yeast,
food containing alcohol
and using a fan-
assisted mode.
Use a mode without fan-
assistance, e.g., top heat/
bottom heat.
Fruit juice or protein stains
on enamelled parts.
Moist cake or meat
juices.
Harmless changes in the
enamel, cannot be remedied.
Production-no. oven:
Model designation oven
