Kuppersbusch KI9820.0SF, Instructions For Use And Installation

Page: 37 / 72

37
•
Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings.
To stop the sound and the blinking, press the key [ 00 ].
•
Egg timer function :
Example for 29 minutes :
Action
Control panel Display
Activate the hob press display [ ] zone control lights are on
Select« Timer » press 3s [CL] display [ 00 ]
Set the units slide on the “SLIDER“ to [ 2 ] [ 2 blinking ] [ 0 fixed ]
Validate the units press display [ 20 ] [ 2 fixed ] [ 0 blinking ]
Set the tens slide on the “SLIDER“ to [ 9 ] [ 2 fixed ] [ 9 blinking ]
Validate the tens wait 2 seconds [ 29 ]
After a few seconds the control light stops blinking.
As soon as the selected cooking time is finished the timer display will blink [ 00 ] and a sound will be heard.
To stop the sound and the blinking, press the display [ 00 ]. The hob switches off.
Automatic cooking
All the cooking zones are equipped with an automatic “go and stop” cooking function. The cooking zone starts at full
power for a certain time, and then reduces automatically its power to the pre-selected level.
•
Start-up :
Action
Control panel Display
Zone selection press display [ 0 ] selected [ 0 ] and control light on
Full power setting slide on the “SLIDER“ and keep on
the power level the power level is blinking with [ A ]
•
Switching off the automatic cooking :
Action
Control panel Display
Zone selection press on the zone the power level is blinking with [ A ]
Power level selection slide on the “SLIDER“ [ 0 ] to [ 9 ]
Stop&Go function
This function stops the entire hob’s cooking activity temporarily and allows restarting with the same settings.
•
Startup/stop the pause function :
Action Control panel Display
Enter on the Menu Press menu key [ ] the menu is displayed
Engage pause Press on the “SLIDER“ under the
[ II ] light [ II ] on display
Stop the pause
Press 3s on the “SLIDER“ under the
[ II ] light Previous setting on display
Recall Function
After switching off the hob [ ], it is possible to recall the last settings.
•
cooking stages of all cooking zones (Power)
•
minutes and seconds of programmed cooking zone-related timers
•
Keep warm function
The recall procedure is following:
•
Press the key [ ]
•
Press on the “SLIDER“ under the [ II ] light
The previous settings are again active.