background image

GB 

Instructions for use

You  can  activate  or  deactivate  the  cooker 

hood by operating the functions shown in the 

diagram.
Switch on the extractor fan a few minutes 

before you start to cook in order to ensure 

that a steady air flow has been established 

before fumes appear.
Allow the extractor fan to run for several 

minutes after you have finished cooking 

(between 3 to 5 minutes) in order to expel all 

the grease from the outlet duct. This prevents 

the return of grease, smoke and smells.

Program the working time

Proceed as follows:
1.- Choose the required speed.
2.- Press “timer”. The light will begin to flash.
3.-The duration of the “timer” is 10 min.
4.-During the programmed time, fan speed 

can be changed.

 The intensive speed is autoprogramed and 

will change to speed 2 after approximately 

10 minutes.

Changing light bulbs

Proceed as follows:
•Unscrew the lamp cover.
•Change the broken / burnt out lamp. 
•Screw the lamp cover back in.

•  If  your  kitchen  hood  is  made  of  stainless 

steel, use proprietary cleaners mentioned in 

the product instructions.

•  If your kitchen hood is painted, use lukewarm 

water and a neutral soap. 

•  Never use metallic scourers, nor abrasive or 

corrosive products.

•  Dry the kitchen hood using a cloth that does 

not produce fibres.

•  Do not use vapour cleaners.
•  To  remove  the  filters  from  their  fittings, 

press lightly on the locks and then pull them 

off.

Cleaning the hood body

Cleaning the metal filters

•  To  remove  the  filters  from  their  fittings, 

press lightly on the locks and then pull them 

off.

•  The metal filters can be cleaned by soaking 

them in hot water with neutral detergent until 

the fat dissolves and then rinsing them under 

the tap or using special anti-grease products. 

They can also be washed in a dishwasher. 

In this case, it is advisable to stack them 

vertically to avoid food residues to stick to 

them.

•  Cleaning in a dishwasher may damage the 

metallic surface (blackening it), although this 

will not affect its fat retention capacity.

•  Once clean, leave them to dry off and then 

fit them onto the kitchen hood.

During cleaning and maintenance work, 

make sure the safety instructions are 

complied with.

Cleaning and maintenance

Summary of Contents for KD 6210.1 GE-04













Reviews: