H5-60-85-01
21
For internal use only
6.11
Replacing the processor
Remove the processor as indicated on page 19 and 20.
Disconnect the connector (L) between the control board and the
flat multiwires.
Remove the processor as indicated in fig. 35 and 36.
Remove the processor as indicated in fig. 37.
Install the new processor correctly using the positioning aid as indicated in fig. 34.
Install the control board by reversing the disassembling process.
Switch on the electricity supply to the hood.
Check the different control functions to ensure that the hood is working properly.
Fig. 33
L
Processor
Positioning aid
Fig. 34
Fig. 35
Fig. 36
Fig. 37
Summary of Contents for KD 12450.0
Page 1: ... c QLMHFH c IJLMHFH ...
