background image

20

KGCT 907.2E

Child proof lock (sensor-lock)

Operating the sensor-lock detains unauthorised persons from using the ap-
pliance. In order to activate this lock the cooking area has to be in operation.

Activating child proof lock:

Press the sensor-lock (2 seconds). 
The child proof lock can be activa-
ted if the cooking area is in opera-
tion. In this case you can only 
choose a lower cooking setting or 
switch off.

The lock is indicated by 3 flashing control indicators.

Be careful:

 

Switching off the cooking area does not deactivate the lock!

Deactivating the child proof lock:

Press the sensors under the two left flasing control indicators at once. 
After not more than 3 seconds press the sensor under the flashing control 
indicator on the right.

Note:

 

When the power supply has been interrupted the child proof lock is no longer 
active.

Time limit function (holiday function)

The appliance is equipped with an automatic time limit function. This function 
makes sure that the appliance is not in operation for a long time. The time 
period of the time limit depends on the selected cooking setting, eg.: The hig-
her the selected cooking setting, the faster the appliance is switched off.

The function to limit operation time works separately for each cooking zone.

Other functions

■ 

If pressing two or more sensor keys – at the same time e.g. when a pan 
is mistakenly put onto the sensor key no function is activated. An audible 
signal sounds after 10 seconds. The appliance switches off automatically 
after 20 seconds.

Exceptions:

– Deactivation of the child proof lock

– Switching off the cooking zones

■ 

If you continue to press a sensor button even after having set the highest 
cooking setting, an audible signal sounds after 10 seconds. After 20 se-
conds the appliance switches off automatically. 

■ 

In case of a break down of the mains supply the appliance does not auto-
matically switch on again. If the child proof lock was activated before the 
power failure, this is now deactivated.

■ 

If the electronics overheat, the hob will switch off. All 4 LED indicators will 
flash and a cyclical signal will be heard.

at once,

after max. 3 Sek.

Cooking setting

Switching off time after

9
8
7
6

2 hours

5

3 hours

4

4 hours

3
2

5 hours

1

10 hours

Summary of Contents for KCT 906.2E













Reviews: