33
REGULATION
Before performing any regulation, disconnect
the electricity supply to the appliance.
After carrying out any regulation or pre-
regulation operations, any seals must be
replaced by the technician.
The regulation of primary air to our burners is
not necessary.
9) VALVES
Regulation of the “Minimum”:
- light the burner and turn the knob to the “Minimum”
position (small flame fig. 1).
- Remove the knob “M” (fig. 14) of the valve, which
is simply pressed onto the post.
- Insert a small screwdriver “D” into the hole “C”
(fig. 14) and turn the closing screw either right or
left until the burner flame is conveniently regulated
to the “Minimum”.
Ensure that the flame does not go out when
switching quickly from the “Maximum” position to
the “Minimum” position.
It is understood that the aforementioned
regulation must only be carried out with burners
which use G20, while for burners which use G30
or G31 the screw must be blocked completely.
In the case of a “DUAL” burner, the regulation
screw situated inside the post of the valve regulates
the central flame, while the screw next to the valve
regulates the outer flame.
The operations described above can be carried out
easily, whatever the position of the hob or however
it is fastened to the unit.
THE BURNERS DO NOT REQUIRE ANY
REGULATION OF THE PRIMARY AIR.
FIG. 14
