21
FEATURES OF YOUR WINE COOLER
INSTALLATION INSTRUCTIONS
Before Using Your Wine Cooler
Remove all exterior and interior packing.
Before connecting the Wine Cooler to the power source, let it stand upright for approximately 2 hours.
This will reduce the possibility of a malfunction in the cooling system caused by handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
The door on this appliance can be opened from either the left or the right side. The unit is delivered with the
door opening on the left side (
The maximum angle of opening of the door is 100°"
). Should you wish to open
the door from the right, follow the instructions „Reversing the door swing of your appliance.
INSTALLATION OF YOUR WINE COOLER
This device is designed to be incorporated into fitted kitchen units
The appliance should be positioned in a well-ventilated, dry room.
Place your Wine Cooler on a position that is strong enough to support it when it is fully loaded. To level your
Wine Cooler, adjust the front leveling leg at the bottom of the Wine Cooler.
This appliance must be fixed at the top and the bottom using the rail provided for the purpose in order to avoid
any risk of tipping when the shelves are slid out
Locate the Wine Cooler away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct
sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold
ambient temperatures may also cause the unit not to perform properly.
Plug the Wine Cooler into an exclusive, easily accessible plug socket. Any questions concerning power and/or
earthing should be directed towards a quali
fied electrician or an authorized products service centre.
Shelf
Door
Handle
Digital control panel
Shelves
Condensor Cabinet Leveling legs
Condensor Cabinet Leveling legs
Shelf
Shelf
