Kuppersbusch EMWK 1050.1E, Instructions For Use Manual

Page: 10 / 37

43
EN
Basic controls
Setting the clock
After your microwave oven is first plugged in or
after a power failure, the clock display will flash to
indicate that the time shown is not correct. To set
the clock, proceed as follows:
1. Press the
Clock key. The hour numbers will
start to flash.
2. Press key “ - ” and “ + ” to set the hours.
3. Press again the Clock key to set the minutes.
The minute numbers will start to flash.
4. Press key “ - ” and “ + ” to set the minutes.
5. To finish, press the Clock key again.
Hiding/Displaying the Clock
If the clock display disturbs you, you can hide it by
pressing the
Clock key for 3 seconds. The dots
that separate the hours and minutes will flash but
the rest of the clock display will be hidden.
If you want to see the clock display again, press
the
Clock key again for 3 seconds.
Safety blocking
The oven functioning can be blocked (for
example, to stop it being used by children).
1. To block the oven, press the
Stop
key for 3
seconds. You will hear a sound signal and the
display
will show the word “SAFE”. The oven is
blocked in this state and cannot be used.
2. To unblock the oven, press the Stop key
again for 3 seconds. You will hear a sound
signal and the
display will show the time
again.