Service Manual
16
For internal use only
6.1
Turntable motor
1. Remove the attachments.
2. Close the door and lie the microwave down on the
back.
3. Remove the motor cover.
Pay close attention to the silicone sealing and the
insulation panel of the grill (for combination models only).
Caution!
The motor of the turntable must have a
metal shaft!
6.2
Door, inner frame, hinges and closing device
In order to be able to re-use individual elements without any damage we have below listed the correct
procedure for removing the door and its components. The inner frame is only pressed on without the
help of any devices such as screws or pins.
Removing the door
1. Pull the door right open.
2. Insert rivets into the holes of the hinge.
3. Pull the door upwards out of the hinges.
Removing the inner frame
1. Lift up the frame direct next to the hinges and remove
it. The frame is a little thinner at this point and can be
lifted out more easily.
