background image

28

Operation

GB

Automatic switch-off (timer) 

   

The automatic switch-off device is used to automatically switch off any cook-
ing zone after a stipulated period of time. Cooking times ranging from 01
minute to 99 minutes can be set.

1. Switch on the hob. Switch on one or more cooking zones and set the

required power settings.

2. Press the 

timer key

 

. The timer display will show 00. The 

 symbol

will blink for cooking zones that can be selected.

3. Press the corresponding 

sensor field

 

 to set the time.

After a few seconds your input will be assumed and the procedure will
have commenced.

4. The cooking zone will be switched off when the time has lapsed. A signal

will sound for a while and can be switched off by pressing any key
(except for the ON/OFF key).

Notes
• Repeat steps 2 to 4 to program the automatic switch-off device for another

cooking zone.

• If you wish to check on the time that has lapsed (switch-off device), press

the 

timer key

 

 and then press the corresponding 

sensor field

 for the cooking zone. The setting displayed can be read and

changed.

• Terminating the function of the timer: Select the respective cooking zone

and press the 

sensor field

 

 to delete the time (“0”).

• If several cooking zones have been programmed with the automatic

switch-off function, the timer display will always show the cooking zone
with the shortest time.

Minute minder (egg timer) 

  

The cooking zones are switched off.

1. Switch on the hob.
2. Press the 

timer key

 

. The decimal point of the timer display lights up;

the minute minder has been selected.

3. Press a 

sensor field

 

 to set the time. After a few seconds your

input will be assumed and the procedure will have commenced.

4. Once the time has lapsed a signal will sound for a while and can be

switched off by pressing any key (except for the ON/OFF key).

Some of the cooking zones are already in operation

• Press the 

timer key

 

 repeatedly until the decimal point in the timer dis-

play lights up.
Press a 

sensor field

 

 to set the time.

• After a few seconds your input will be assumed and the procedure will have

commenced.
Once the time has lapsed a signal will sound for a while and can be
switched off by pressing any key (except for the ON/OFF key).

Please note:
• The minute minder remains in operation when the glass ceramic hob is

switched off. Switch the hob on to adjust the time.

blinking

Decimal point

blinks

Summary of Contents for EKI 6741


















Reviews: