Operation
GB
25
Two-circuit/three-circuit
connection
(only for cooking zones with several circuits)
Two-circuit / three-circuit connection of the respective cooking zone can only
be effected after the corresponding cooking zone has been switched on.
1. Select the desired cooking level 1-9.
2. Switch on the second or third heating circuit with the
circuit activation
key
.
The control lamps (activating an additional circuit) in the respective power
level display blinks or lights up.
Second heating circuit activated: the control lamp blinks.
Third heating circuit activated: the control lamp lights up.
3. Pressing the
circuit activation key
again will switch off
the outer heating circuit.
The control lamp (activating an additional circuit) will go off.
Note
• Manually activated heating circuits will automatically be deselected when
the cooking zone is switched off.
• For cooking zones grouped next to one another (see marking on the hob),
pressing the
circuit activation key
or
will connect and activate the
cooking zones.
The control lamp for the dominant cooking zone will light up in the power
level display. The keys and the power level display of the cooking zone
which has been added will be deactivated. The two cooking zones will
operate separately again when the activation mode is deselected.
Childproof lock
(child)
The lock enables operation of the keys and the setting of a power level to be
deactivated during operation.
Activating the lock
1. Press the
lock key
for some time (3 sec.).
Then immediately press the
lock key
again to activate the function.
The control lamp (lock) next to the key will light up. The cooking setting
display briefly shows “child”. The controls are locked.
Switching off the lock
2. The keys to be pressed are market with a dot.
Notes
• In the event of a power cut the lock will be cancelled, i.e. deactivated.
Cleaning lock
(safe)
The keys may be locked for approx. 10 - 15 seconds in order to clean the
sensor keys.
1. Press the
lock key
to activate the cleaning lock.
The control lamp above the Lock key will light up. The sensor keys will be
available as usual once the time has lapsed.
3 sec.
press simultaneously
