Kuppersbusch EKE 606.4 Instructions For Use And Installation Instructions Download Page 6

22

Operation

GB

Operating the keys

The controls described here expect the pressing of a (selection) key 

to be

followed

 by the pressing of a subsequent key.

The next key will need to be pressed 

within 10 seconds

, otherwise the

selection will be deleted.
The Plus/ Minus keys can be touched individually or be permanently pressed.

Switching on the hob and cooking zones

1. Press the 

ON key

   until the power setting displays indicate 0. A short

signal will sound. The controls are ready for operation.

2. Immediately use the 

Plus key

   or the 

Minus key

   of a cooking zone

to select a cooking level. The Plus key will activate power setting 1 and
the Minus key power setting 9.

3. Place a 

metal cooking pot

 onto the cooking zone. The pan recognition

device will activate the heating.
As long as no metal cooking pot is placed onto the cooking zone, the dis-
play will alternate between the power level set and the symbol  . If no
pot is used the cooking zone it will switch off after 10 minutes for reasons
of safety. Please refer to the Section on “pan recognition”.

Switching off a cooking zone

4. a) Press the 

Minus key

   several times until the power setting display

shows 0, or
b) Press the 

Minus key

   and the 

Plus key

   once at the same time.

The cooking zone is switched off direct irrespective of the power setting
or
c) Press the 

OFF key

  . The entire hob will be switched off (all of the

cooking zones are switched off).

Switching off the hob

5. Press the 

OFF key

  . The hob will be completely switched off, irrespec-

tive of any settings.

STOP function

The cooking process can be briefly interrupted with the STOP function, e.g. if
the doorbell rings. The STOP function must be released in order to continue
cooking at the same power level. If a timer has been set it will pause and will
then continue.
This function is only available for 10 minutes for reasons of safety. The hob
will then be switched off.

1. Pots and pans are on the cooking zones and the required power levels

have been set.

2. Press the 

Stop key

  . The letters S-T-O-P will be shown one after

another instead of the cooking levels previously selected.

3. The interruption is ended by firstly pressing the 

Stop key

  

and 

then

pressing any 

other key

 (except the ON/OFF key).

The second key must be pressed within 10 seconds, otherwise the hob
will switch off.

Summary of Contents for EKE 606.4
















Reviews: