background image

EKE 605.2F / 905.2F

17

Time limit function (holiday function)

The appliance is equipped with an automatic time limit function. This function 
makes sure that the appliance is not in operation for a long time. The time 
period of the time limit depends on the selected cooking setting, eg.: The high-
er the selected cooking setting, the faster the appliance is switched off.

The function to limit operation time works separately for each cooking zone.

Other functions

■ 

If pressing two or more sensor keys – at the same time e.g. when a pan 
is mistakenly put onto the sensor key no function is activated. An audible 
signal sounds after 10 seconds. The appliance switches off automatically 
after 20 seconds.

Exceptions:

– Deactivation of the child proof lock

– Switching off the cooking zones

■ 

If you continue to press a sensor button even after having set the highest 
cooking setting, an audible signal sounds after 10 seconds. After 20 sec-
onds the appliance switches off automatically. 

■ 

In case of a break down of the mains supply the appliance does not auto-
matically switch on again. If the child proof lock was activated before the 
power failure, this is now deactivated.

■ 

If the electronics overheat, the hob will switch off. All 4 LED indicators will 
flash and a cyclical signal will be heard.

What to do if there is a fault

Unplug the appliance befor repair!

Check carefully to make sure that the fault is not due to misoperation. You 
can rectify many faults yourself

Important note:

Repairs should only be carried out by an authorised technician! Even during 
the guarantee period repairs will not be free of charge if due to incorrect op-
eration or to non-adherence to our instructions given under “What to do if 
there is a fault”.

You should always give the data on the rating plate to your service centre in 
case you have enquiries or want to order spare parts. The rating plate is lo-
cated underneath the cooking area. The rating label is located at the bottom 
side of the hob. It is also stuck onto the cover page of this operating manual.

Cooking setting

Switching off time after

9
8
7
6

2 hours

5

3 hours

4

4 hours

3
2

5 hours

1

10 hours

Fault

Cause

Remedy

Circulating dash 
symbols on all 4 
LED displays. 

No faults; normal 
display after power 
interruption. 

If no objects have been lying on 
or obstructing the sensors, con-
firm this by pressing the “Off”-
sensor.

Horizontal dashes 
that are shown on 
the display running 
from top to bottom.

Failure of electronic 
component.

Switch off cooker fuse in fuse-
box. Call service centre.

Not possible to 
switch off cooking 
area.

Failure of electronic 
component.

Switch off cooker fuse in fuse-
box, Call service centre.

The LED indicator for 
the cooking level or 
heat indicator does 
not light up or only 
partly lights up.

LED indicator defec-
tive.

Call Customer Service. There is 
a danger of being burned as the 
temperature warning is not 
reliable.

Cooking area does 
not heat.

Fuse is defective.

Check or replace cooker fuse in 
fuse box.

Child proof lock 
activated.

Deactivate child proof lock.

Cooking area is 
defective.

Call service centre.

Inner circuit of the 
dual-circuit zone is 
defective.

Do not operate the functioning 
outer circle. Immediately call 
service centre.

Individual / all sen-
sors do not react to 
touch. 

Sudden change in 
heat radiation.

Remove the source of heat.
Disconnect the hob from the 
mains (via the fuses).

Summary of Contents for EKE 604.1











Reviews: