29
ENGLISH
INCIDENT
CAUSE
SOLUTION
I have programmed the
pyrolysis function, the oven is
working properly but pilot light
is not lit up.
Pilot light
does not work
properly.
Call the Technical Assistance
Ser vice.
The pyrolysis programme has
ended and the oven is cold,
but the door is locked and
symbol is
flashing.
You did not turn the control
dial to position
0
when the
pyrolysis programme ended.
1. Turn the control dial to
position
0
and wait for 1
minute.
2. Turn the control dial to
position
and wait for 1
minute.
3. Turn the control dial to
position
0
again and wait
until pilot light
turns off.
The control dial is in position
0
and the door is still locked.
The oven has not cooled down
to the safe temperature.
Wait until the oven cools and
pilot light
turns off.
The control dial is in position
0
, the oven is cold and the
door is still locked.
You have not followed the
instructions to cancel the
operation correctly.
1. Turn the control dial to
position
0
and wait for 1
minute.
2. Turn the control dial to
position
and wait for 1
minute.
3. Turn the control dial to
position
0
again and wait
until pilot light
turns
off.
I have put the control dial in
position
0
and the door is
unlocked, however symbol
is still lit up and the remaining
time of the cleaning cycle can
be seen on the
display.
You have not followed the
instructions to cancel the
operation correctly.
Follow the instructions to
cancel the pyrolysis
programme.
