background image

4

Service Manual

For internal use only

1.

Safety instructions

Danger!

Repairs may only be carried out by a qualified electrician! 

Inexpert repairs may lead to danger and injury to the user!

To prevent electric shocks, please observe the following instructions:

In the event of a fault, housing and frame may be live!

Touching live components inside the appliance may cause dangerous currents to flow through your

body!

Prior to repairs, disconnect the appliance from the mains!

When inspecting live parts, a residual current operated device must be used at all times!

The ground wire resistance must not exceed that specified in the standard! It is of vital importance

for ensuring the safety of people and the functioning of the appliance.

On completion of repairs, an inspection must be carried out in accordance with VDE 0701

[Association of German Electrical Engineers] or the corresponding regulations for your country!

On completion of repairs, a function and impermeability inspection must be carried out. 

Make sure you observe the following instructions:

The appliances must be disconnected from the mains prior to all repairs. If inspections need to be

carried out on live appliances, make sure you use a residual current operated device.

Caution!

Sharp edges: Use protective gloves.

Components may be electrostatic!

Observe handling precautions!

Summary of Contents for EDG 6500.0



















Reviews: