Kuppersberg WIS 60149, Technical Passport, Page: 16 / 48

16
TECHNICAL PASSPORT ENGLISH
Washing Machines

Zips shall b e zipped close and buttons or hooks shall be fi xed. The loose
band or ribbon shall be bound together.

Do not wash colored clothes together.

Follow the washing guide printed on the clothes’ mark or the symbol types
of care label by the manufacturer.

Before fi rst washing, use a white towel dipped in detergents to rub an
uneasily discovered place of the clothes for a moment, check whether there is color
on the white towel, if the color fades, be careful in washing the clothes.

If a part of clothes is too dirty, use a towel or soft brush dipped in detergents
to rub the dirty part slightly in a same direction, then put the clothes into machine.

The machine may shock heavily in spin when there is only few clothes or
single big and heavy dress, add 2~3 pieces of clothes into the tub to relieve shock.
NO TROUBLE CONDITIONS
SITUATION REASON
The washer door can
not be opened.

The washer is in operation
 Set by the child lock

There is clothes caught between the seal ring and the door.
Peculiar smell.

Some components are made by rubber, so there may be smell of rubber.
Little water in wash
and spin

Drum washing machine need only little water to wash clothes.
No water infl ow.

Whether the faucet is open.

Whether the Water Supply Hose be frozen.

Whether the Water Supply Hose or the metal fi lter in water inlet be blocked.
Infl ow of water
during operation.
 Water will be supplied automatically when the water level decline.

Add clothes during operation.
Drainage water in
during washing.
 Whether there is too much detergents, or detergents with too much bubble.
Remaining time
changes

If the washing clothes is in uneven distributed, water will be added to
balance it.

The displayed remaining time is calculated on the basis of 15 liter/minute
water intake. As the water pressure will change, actual time will be prolonged
or shortened accordingly.
 If clothes are biased in spin, the spin time will be prolonged to correct the
biasing.
Abnormal sound in
spin process.

Check if power cord contact the machine body.

Check if the fi xing (bolts) has been removed.

Check if there are any barrettes or metal articles inside.
Program stops when
power off
 If power off, the program stops and will not continue when power on, please
press the POWER ON/OFF button and re-set the program.