Kuppersberg VBMR 134, Technical Passport, Page: 22 / 52

22
TECHNICAL PASSPORT ENGLISH
Built under larder
PART 2. HOW TO OPERATE THE APPLIANCE
Thermostat setting
The thermostat automatically regulates
the inside temperature of the refrigerator. By
rotating the knob from position 1 to 5, colder
temperatures can be obtained.
Important note: Do not try to rotate knob
beyond position 1. It will stop your appliance
from working.
Â
For short-term storage of food in
the fridge, you can set the knob between
minimum and medium positions (1-3).
Â
For long-term storage of food in
the fridge, you can set knob to the medium
position (3-4)
Â
Note that: the ambient temperature,
temperature of freshly stored food and
how often the door is opened, affects the
temperature in the fridge. If required, change
the temperature setting.
Â
When you first switch on the
appliance, you should ideally try to run it
without any food in for 24 hours and not
open the door. If you need to use it straight
away, try not to put a large quantity of food
inside.
Â
If the unit is switched off or
unplugged, you must allow at least 5 minutes
before restarting in order not to damage the
compressor.
Â
The larders (coolers) do not have a
freezer compartment but can cool up to 4 - 6 °C.