Kuppersberg NFML 177, Technical Passport

Page: 38 / 84

38 38
Kühlschrank
38
TECHNICAL PASSPORT ENGLISH
Refrigerator
III. PREPARATIONS FOR USE
Installationlocation
1. Ventilation condition
The position you select for the
refrigerator installation should be
well-ventilated and has less hot air.
Do not locate the refrigerator near a
heat source such as cooker, and avoid it
from direct sunlight, thus guaranteeing
the refrigeration effect while saving
energy consumption. Do not locate the
refrigerator in the damp place, so as to
prevent the refrigerator from rusting
and leaking electricity.The result of the
total space of the room in which the
refrigerator is installed being divided
NOTE: Figure 1,
Figure 2 only illustrate
the space demand of
the product
W D H А B C(°) E F
912 704 1770 1524 1062 160 50 100
Fig.1
Fig.2
by the refrigerant charge amount of
the refrigerator shall not be less than
8 g/ M
3
.
NOTE: The amount of refrigerant
charged for the refrigerator can be
found on the nameplate.
2. Heat dissipation space
When working, the refrigerator gives
off heat to surroundings. Therefore,
at least 300mm of free space should
be spared at the top side, more than
100mm on both sides, and above 50mm
at the back side of the refrigerator.
Dimensions in mm: