Kuppersberg NBM 17863, Technical Passport

Page: 42 / 92

42
TECHNICAL PASSPORT ENGLISH
Refrigerator- freezer
Â
Remove the decorative соvеr оn the left side of the beam in the refrigerator
and take out the middle beam fixing blосk, screws and plastic inserts in the
attachment. Then insert the plastic inserts into two uрреr holes of the middle
beam (оr the lower holes), and then fix lhe middle beam fixing blосk to two lower
holes (оr the uррег holes) of the middle beam with screws. When the screw is
half tightened, move the fixing bосk to the cablnet and tighten the screws. Finally,
tighten the fixing blосk оn the cablnet with the small screws. The installation is
compleled. (This item is optional fог the middle beam fixing blосk)
(The picture above is only fог reference. The actual configuration will depend оn the physical
product ог statement bу the distributor)
Detail В
Scale 1:2
Detail А
Scale 1:2