Kuppersberg GLA 689, Technical Passport, Page: 29 / 84

29
english Technical passporT
Dishwasher
may vary, dissolution of the salt in water
may take a couple of hours. Therefore,
Salt Indicator remains on for a while
after adding salt into the machine.
Â
You may use Half Load / Tablet
Detergent Key and Time Delay key
features as necessary.
Â
Refer to «Table of Programme
Data and Average Consumption Values»
to select a suitable programme.
Â
Select the desired programme
with Programme Selection key.
Â
Press Start / Pause / Cancel key
to start the programme.
Pay attention not to open the
door of the machine when it is running.
If you need to open the door, safety
system will stop your machine. There
may be a rush of vapour when you open
the door of your machine; be careful.
The programme will resume running
when you close the door.
Â
When the programme you have
selected comes to an end, an audible
warning signal with intervals of 8
seconds will warn you to turn off your
machine. This audible signal will warn
you 10 times before it turns off.
Â
Open the door of the dishwasher.
Â
Press On / Off key to turn off
your machine.
Â
Indicator lights on the
programme display will turn off.
Â
Close the tap.
Â
Unplug the machine from the
socket.
Leave your dishes in the machine
for about 15 minutes after they are
washed in order to have them cooled
down. Your dishes will dry in a shorter
time if you leave the door of your
machine ajar during this period. This
will increase the drying effectiveness of
your machine.