Kuppersberg GIM 4578, Technical Passport, Page: 87 / 156

87
ENGLISH TECHNICAL PASSPORT
Dishwasher
Loading the lower basket
We suggest that you place large and
difficult to clean items into the lower
basket: such as pots, pans, lids, serving
dishes and bowls, as shown in the fig -
ure below. It is preferable to place serv-
ing dishes and lids on the side of the
racks in order to avoid blocking the ro-
tation of the top spray arm.The maxi-
mum diameter advised for plates in
front of thedetergent dispenser is of 19
cm, this not to hamper the opening of it.
Loading the cutlery basket
Cutlery should be placed in the cut-
lery basket separate from each other in
the appropriate positions. Avoid nest-
ing of the cutlery to prevent insufficient
cleaning performance.
WARNING
Do not let any item extend
through the bottom. Always
load sharp utensils with the
sharp point down!
For the best washing effect,
please load the baskets refer to
standard loading options on last
section of PART I: Generic Version
Â
Please do not overload your
dishwasher. This is important for good
results and for reasonable consumption
of energy.
NOTE:
Very small items should not be
washed in the dishwasher as they could
easily fall out of the basket.
Removing the dishes
To prevent water dripping from the
upper basket into the lower basket, we
recommend that you empty the lower
basket first, followed by the upper
basket.
WARNING
Items will be hot! To prevent
damage, do not take glass and
cutlery out of the dishwasher
for around 15 minutes after
the program has ended.
Loading the upper basket
The upper basket is designed to
hold more delicate and lighter dish-
ware such as glasses, coffee and tea
cups and saucers, as well as plates,
small bowls and shallow pans (as long
as they are not too dirty).Position the
dishes and cookware so that they will
not get moved bythe spray of water.