Kuppersberg F612, Technical Passport

Page: 3 / 24

3
english Technical passporT
extractor hood
DEAR CUSTOMER,
Thank you for purchasing our
equipment! We are sure that appliances
of the KUPPERSBERG brand, which are
modern, functional and made of high
quality materials and components, will
be a reliable assistant in your kitchen.
Please read this manual carefully
before starting any installation work. It
will help you avoid premature failure, as
well as extend the life of your appliance
to the maximum possible.
Please note that the installation
of this appliance must be carried
out by a qualifi ed technician and in
accordance with these instructions.
The manufacturer is not liable for any
consequences of failure to observe this
condition.
Caution!
The manufacturer reserves the right
to make any changes, without prior
notice, to design, outside appearance
and scope of supply of appliance, which
will be considered as necessary and
useful according to the manufacturer’s
point of view. Possible modifi cations
will not affect the basic properties,
including those that relate to safe
operation of the appliance.
SECTION 1.
SAFETY PRECAUTIONS
1. Assembling and electrical
connection of the appliance must be
carried out by skilled technicians of
authorized service center.
2. The appliance is designed to
operate on 220-240 V AC. Make sure
that the technical parameters of your
home power supply system correspond
to the data for the power supply. If
parameter values are above or below
the specifi ed range, the use of the
appliance is prohibited.
3. Do not connect the kitchen air
cleaner to the ventilation channels that
are used to remove smoke and fumes
from the equipment operating on any
other energy sources except electric
one.
4. The appliance is to be connected
only to an earthed power supply system.
5. Do not cook fl ammable foods
below the kitchen air cleaner.
6. Use aluminum fi lter that comes
with the appliance. The use of other
materials is prohibited!
7. Do not connect the appliance
to the power supply system, until
the assembly and installation of the
appliance is completed.
8. Do not use the appliance without
the aluminum fi lter in place.
9. Do not touch the lamps.
10. Do not remove the aluminum
fi lter while the appliance is in operation.
11. Do not disconnect the appliance
from the power supply system directly.
If necessary, turn the appliance off using
the control panel and, only after that,
unplug it from the power supply system.