Bona Belt UX Manual
19
EN
Starting the Machine
To start the machine proceed as follows:
Become familiar with the
machine and read all
instructions & safety notices.
Ensure that all operators
read this manual.
1.
2.
3.
Locate the power supply. The
socket must be compatible
with the plug.
To avoid electrical hazards
the socket must be grounded
with a 20 A fuse.
If using DCS, connect tha
adaptor supplied with the
machine and DCS hose
directly.
If using a dust bag, place the
dast bag on the suction pipe
by tying the cord.
4.
Wind the cable around the
cable safety arm
(A)
to keep
it away from the path of the
machine.
Open the side guard
(A).
5.
6.
Lower the tensioning unit
using the drum tensioning
lever
(A).
Insert the abrasive belt
(A)
, ensuring it protrudes
approximately 2 mm from
the rubber drum area but
runs along the inside of the
tensioning unit.
7.
Only use 750 mm x 203 mm abrasive belts.
Tighten the drum using the
drum tensioning lever
(A).
8.
