3
ASSEMBLY INSTRUCTIONS
Read the complete assembly instructions before starting the assembly.
You should have:
- one tillage tool assembly
- one lift control wiring assembly
- five 9” cultivator sweeps with five bevel washer spacers
A.
ASSEMBLY OF TONGUE
CAUTION:
Steps 1 and 2 should be performed with caution. Care should be taken to
prevent back injuries or other lifting related injuries.
1. The crated tillage tool should have arrived in a vertical position. Lay the crate down with the
tires positioned towards the ground. Remove the crate and position the tillage tool on it’s side.
Remove the center coulter assembly by removing the wire lock pin. At this time the tongue
can be rotated in a counter-clockwise direction towards the front of the tillage tool assembly.
Reinstall the center coulter assembly and fasten securely with the wire lock pin that was
previously removed.
(See Figure 1.)
Figure 1. – Tillage Tool Parts
Weight Rack
Coulter Shank
Tongue
Coulter
Sweep
Shank
Top Link
Summary of Contents for Till-Ease 543
Page 2: ...sdfdsfsdfsdfds ...