Kunz AcrEase MR55BE Owner'S Manual With Assembly Instructions Download Page 5 | Manualshive

Page: 5 / 24

Kunz AcrEase MR55BE Owner'S Manual With Assembly Instructions Download Page 5

3

IMPORTANT SAFETY INFORMATION

Do not allow anyone to operate this equipment who has not fully read and
comprehended the safety manual and who has not been properly trained in the safe
operation of the equipment.

Operator should be familiar with all functions of the unit.

Keep hands, feet, hair and clothing away from moving parts.

Remove all objects from the work area that might be picked up and thrown by the
blades.

Do not mow when children and others are around.

Keep all safety shields and deflectors in place during operation.

Shut off the engine and allow the mower blades to come to a complete stop before
making any adjustments to the mower.

Shut off engine before disconnecting the wing mower from the tow vehicle or
attempting to move the wing mower by hand.

Never carry children or passengers.

Do not allow children to operate this machine.

Follow all safety precautions outlined by the manufacturer of the tow vehicle being
used to pull this product.

This entire manual is filled with important safety information. Please read it
carefully.

«
...
3
4
5
6
7
...
»

Summary of Contents for AcrEase MR55BE

























Reviews:

No comments