10
11
3.
Touch the heating zone selection control
4.
Select a heat setting by touching the
“-”
or
“+”
control.
• If you don’t choose a heat setting within 1 minute,
the ceramic hob will automatically switch off. you
will need to start again at step 1.
• You can modify the heat setting at any time during cooking.
• By touching either of these buttons, the value will increase or
drop.
5.
Touch the heating zone selection control, then touch the
key,
this turns on the dual ring zone. Touching the
key again will turn
on the triple ring. The leD indicator on the left side of the dual ring
control will light.
When you have finished cooking
1.
Touch the heating zone selection control that
you want to switch off.
2.
Turn the cooking zone off by touching the
“-”
and
scrolling down to
“0”
.
3.
Turn the hob off by touching the
“ON/OFF”
control.
4.
beware of hot surfaces
The cooking zones that are still hot to the touch
are indicated by an
“H”
. The
“H”
will turn off when
the surface has cooled to a safe temperature. To
save energy to heat other pans, use the zone that
is still hot.
Locking the controls
• You can lock the controls to prevent unintended use (for example
children accidentally turning the cooking zones on).
• When the controls are locked, all the controls except the
ON/OFF
control are disabled.
to lock the controls
Touch the lock
control. The timer indicator will show
“Lo”
.
To unlock the controls
1.
Make sure the ceramic hob is turned on.
2.
Touch the lock control
for a while.
3.
you can now start using your ceramic hob.
When the hob is in lock mode, all the controls are disabled except
ON/OFF
. you can always turn the ceramic hob off with the
ON/
OFF
control in an emergency, however this will lock the controls
requiring you to unlock them when using the hob the next time.
Placa-Vitro-KVH2160-Manual-2.indd 10
16/04/10 20:13
