20
21
KIH3300
EN
induction hob
3.
An indicator light will flash next to the key when
pressing the cooking zone selection control.
4.
Select a heat setting by pressing the “-“ or “+” con-
trols.
• If you don’t select a heat setting within 1 minute,
the Induction hob will switch off automatically. you
will need to start over from step 1.
• You can modify the heat setting at any time during
cooking.
If the display flashes alternately between the symbol
and the heat setting
This means that:
• You have not placed a pan on the correct cooking zone or,
• The pan you’re using is not suitable for induction cooking or,
• The pan is too small or not properly centred on the cooking zone.
The hob will only heat up if there is a suitable pan on the cooking
zone.
If no suitable pan is placed on the hob, the display will automatically
turn off after 1 minute.
When you have finished cooking
1.
Press the heating zone selection control that you
wish to switch off
2.
Turn the cooking zone off by pressing the control
down to “0”. Make sure the display shows “0”
3.
Turn off the induction hob by pressing the on/off
control.
4.
Beware of hot surfaces.
The symbol “H” will indicate which cooking zonesare
hot to the touch. It will disappear when the surface
has cooled down to a safe temperature. It can also
be used as an energy saving function, so if you want
to heat more pans, use the hotplate that is still hot.
Using the Boost function
The Boost function increases the heating energy power in one se-
cond and lasts for 5 minutes. Thus, you can obtain a faster cooking.
Using the Boost to get more power
1.
Press the heating zone selection button that you
wish to boost. An indicator light will flash next to the
key.
2.
Press the Boost button, and the heating
zone will start working.
The power display will show the symbol
“P”, indicating that the cooking zone is
in boost mode.
3.
The Boost power will last for 5 minutes, and then
cooking zone will return to the power level that was
set before its activation.
4.
If you want to cancel the Boost function, first press the heating
zone selection button, an indicator light will flash next to the key.
Next, press the Boost button. The heating zone will go back to the
power level that was set before the boost.
Restrictions when using the Boost function
All the cooking zones of this
hob can be used with the
Boost function. If you need to
use this function, please swi-
tch off the other zone in the
same group first. Otherwise
the and symbols will flash
on the display of the selected
zone and the power level will
be automatically set to .
Group a
Group B
Group a
Group B
