14
15
7.
Unscrew and remove the
bottom hinge pin, turn the
bracket over and replace it.
unscrew
Screw
8.
Refit the bracket fitting the bottom hinge pin.
replace both adjustable feet. Transfer the
lower door to the proper position.
9.
Make the middle hinge reverse 180º, then
transfer it to the left proper position. Place
the middle hinge pin in the upper hole of the
lower door and then tight the bolts.
10.
Place the upper door back on. ensure the
door is horizontally and vertically aligned
so that the seal closes on all sides before
finally tightening the top hinge. Then place
the hinge in position and screw it to the top
of the unit.
11.
Put the top cover and then screw it back.
Install door external handle
(if an external handle is present)
Rear spacer
Screw the rear spacers on the back
of the unit.
Screw
Frigo-KC3904-Manual-2.indd 14
18/02/02 16:39
