20
EN
Move
Move the joystick to the left or right, up or
down.
Profi 3+
CompactPlus
Switch operational mode
Push the reset button. The current operational
mode is displayed on the basic device.
Adjust brightness
Turn the knob to the left or right until the
desired brightness is set. If the knob is set to its
maximum right position, brightness is adjusted
automatically.
OPERATION
Inspection
The camera is pushed into the pipe with a push rod. With the joystick it is steered to navigate
bends and branches or overcome obstacles. Therefor the Normal mode has to be active.
In this operational mode the camera reacts to commands quickly and aligns as soon as the
joystick is released. For mesurements or if the camera has to remain a certain position, the
Hold mode is activated. In this operational mode the camera moves slowly and remains the
adjusted position.
Pull camera back
The camera is pulled out of the pipe with a push rod. Therefor the Normal mode has to be
active. When pulling back through bends or branches and when overcomming obstacles, the
camera has to be steered with the joystick to avoid getting stuck or damaging the camera.
Functional overview
Reset
Light
Adjust focus
Turn the knob to the left or right until the focus
is in the desired position.
