HYBRID WOOD STOVE TECHNOLOGY
This stove’s burn system combines the features of non-catalytic technology with the clean efficient burn of
catalytic wood stove to create an easy to use, ultra-low emission hybrid appliance. Read about each feature
below to help you operate your stove efficiently and beautifully
1.
Bypass Control
– Located on the upper right side of the stove, the bypass control allows smoke and
heat to temporarily bypass the hybrid burn system. This helps to quickly heat the chimney and
prevent smoke from coming into the room when the door is open.
Start/Reload Position
– This position helps to quickly heat the chimney and the catalyst during start-
up by allowing some heat to bypass the catalyst. This position also allows you to reload the stove
while preventing smoke from coming into the room. A short pull forward
(about ¾”)
and down will
engage the bypass in the Start/Reload Position.
Run Position –
This
is the normal operating position for the stove. Your stove should always be in this
position unless you are starting or reloading the stove. Simply lift the bypass control and you will feel
it return to the run position.
2.
Primary Air Control
– Located on the lower right side of the stove, this control changes the rate of
burn for the stove. Slide out for high heat output and slide in for low heat output. You can operate
the stove at any burn rate in between high and low.
