OPERATING INSTRUCTIONS
Note
:
•
Supply power should be in correspondence with the value on the nameplate, power outlet needs to be grounded.
•
Do not use the device with power strip, as they may overheat and cause a fire. However, if necessary, use a good qual-
ity extension cord and first make sure that it is in excellent condition.
•
Ensure the tank is correctly fitted, if the tank is full or not in place, the “Tank Full” indicator comes on and the dehumidi-
fier will stop working.
•
If the dehumidifier is turned off and then turned back on again immediately, it will take approximately 3 minutes to reach
full power (compressor back to work).
•
If the dehumidifier switched off by a power cut, it will automatically switch back on once the power is restored.
•
The dehumidifier works best at normal room temperature, its efficiency is reduced if the ambient temperature falls to
below 15°C.
Switching On/Off the Unit
•
Connect the mains lead to socket.
•
Press power button once to turn on the unit. By default, it runs on Manual Dehumidifying Mode.
•
Press Power button once again to turn off the unit.
Humidity Setting Control
Press Manual button once to enter Manual Dehumidifying Mode or to select desired level of humidity from CO-30%-35%-
40%-45%-50%-55%-60%-65%-70%-75%-80%-CO. When CO [Continuous Operation] is set the unit will operate continu-
ously, regardless the relative humidity.
KULL
SAVE
The Energy Savings Smart Operation
When the target relative humidity is reached, the unit will operate only the fan in low speed for
about 3 minutes, then will stop for 17 minutes. The fan will then run for 2 minutes to check the
relative humidity.
If the relative humidity has risen above the target humidity (HS)+3%, the unit will start operating
again. If the relative humidity remains below the target level, the unit will fall back to sleep for
an additional fan works in low speed for about 3 minutes, then stop for 17 minutes.
Timer Setting
At ON Mode, press timer button consecutively to select your preferred timer duration for automatic shutoff setting.
Its corresponding Timer indicator will be displayed on screen.
9
