Kuka KR C4 compact, Assembly And Operating Instructions Manual

Page: 17 / 29

17 / 29 Issued: 24.07.2013 Version: MA KR C4 extended Cooling Unit V1 en (PDF)
7 Decommissioning, storage and disposal
7 Decommissioning, storage and disposal
7.1 Storage
Preconditions
If the cooling unit is to be put into long-term storage, the following points must
be observed:

The place of storage must be as dry and dust-free as possible.

Avoid temperature fluctuations.

Avoid wind and drafts.

Avoid condensation.

Observe and comply with the permissible temperature ranges for storage.

Select a storage location in which the packaging materials cannot be dam-
aged.

Only store the cooling unit indoors.
Procedure
1. The cooling unit must only be stored in a vertical position.
2. Clean the cooling unit. No dirt may remain on or in the cooling unit.
3. Inspect the cooling unit, both internally and externally, for damage.
4. Remove any foreign bodies.
5. Remove any corrosion expertly.
6. Cover the cooling unit with plastic film and seal it against dust.
If necessary, add a desiccant beneath the sheeting.
7.2 Disposal
When the cooling unit reaches the end of its useful life, it can be dismantled,
and the materials can be disposed of properly by type.
Dismantling and disposal must be carried out by a specialist compa-
ny.