Operating instructions
Automatic start/stop system for stand-alone gensets
For product: KEA 292 INS
File:
BA_KEA 292 INS_EN_Ver 2016-07-01.doc
Item no.
2A292I5000
1
Alfred Kuhse GmbH
Telephone: +49 4171-798-0
E-mail: [email protected]
Subject to technical changes.
An der Kleinbahn 39,21423 Winsen
Fax: +49 (0) 4171-798-117
http://www.kuhse.de
_________________________________________________________________________________
1.
Use and basic operation
The
KEA 292 INS
automatic system is used for power generation units that operate in standalone
mode.
The function of the output relay and the parameters can be set with a PC.
Because the KEA 292 has the same dimensions and fastenings as its predecessor,
replacement
is
simple.
Ten parameterisable alarm and operating indicators
– which can be labelled by easily replaceable
paper strips
– as well as
four
general displays
are displayed through LEDs.
The parameterisation can be performed using the
serial USB interface
with the
P
ARA
W
IN
parameteri-
sation program.
Important note!
The operation of the automatic system is simple and uncomplicated as it is carried out via the usual
buttons
– without menu guidance – as for all previous automatic systems.
2.
Revision history
Created
Changed
Version
07-05-2013
First edition
07-05-2013
01/10/2014
Connection diagrams updated
01/10/2014
01/07/2016
Change the header
01/07/2016
