Alfred Kuhse GmbH
Phone: +49 4171-798-0
Changes without further notice
reserved.
An der Kleinbahn 39, D-21423 Winsen (Luhe)
Fax +49 4171-798-117
Service Manual
for product: KEA 201 ERSY:
Control Unit for Emergency Power Gensets
with Overlapping Synchronisation
File:
SA_KEA 201 ERSY_EN_Ver 2016-07-01
1.
Design
The control unit is incorporate into the front door of the switchboard. The front meets the protection class
IP 44 when installed. The two rows of LEDs are marked with interchangeable labels. The relay units are
mounted on the mounting plate and linked to the control unit in the door with the supplied cable.
The control unit has an optic fibre or a USB interface - switches automatically - for the connection of a PC.
By means of the parameterisation program P
ARA
W
IN
, the following settings (password-protected) and
analogue readouts are possible. Parameterisation can also be performed at the display.
1.1.
Parameterisation
1.
Additional Interface CAN
2.
Additional Parameters
3.
Alarm Remote cancelling
4.
Alarms
5.
Analogue Inputs
6.
Analogue Outputs
7.
Battery Monitor
8.
CAN
0
9.
Frequency Controller at isolated Operation
10.
Generator Current Monitor
11.
Generator Voltage Monitor
12.
Hardware
13.
Internal Synchronizer
14.
J1939 engine management
15.
J1939 hide analogue values
16.
Mains Voltage Monitor
17.
Modem
18.
ProMerk. Programmable Flags
19.
Relay and Indicator Functions
20.
Speed Monitoring and Control
21.
Sprinkler Operation
22.
Starting and Stopping
23.
Transfer Mains – Generator
24.
Voltage Controller
