8. - Instructions for work
SR600 GII
33
7N037CUS_B
Wheel Rake
8. Instructions for work
8.1
Place the machine in working
position
From the transport position:
- Perform safety shutdown procedure.
- Disengage the transport locks at the tractor for
both the rake wheels and the rake arms. Rotate the
lock handles until they stop and are aligned with the
hydraulic hoses as shown.
- With the tractor moving forward, activate tractor
hydraulics and fold the rake arms outward to the
desired raking width. The hydraulic hoses for
controlling the rake arm position will be marked with
blue bands.
- Activate tractor hydraulics to lower the rake wheels
until the lift cylinder rods stop pushing. The
hydraulic hoses for controlling the rake wheel
position will be marked with red bands.
The machine is in working position.
Before placing the machine in working
position:
- Check that nobody is within the machine
pivoting area.
- If there is someone, make sure the person
moves away.
