KUHN HR6004DR, Operator'S Manual

Page: 45 / 96

Putting into service
Power harrow
HR6004DR
43
Uncoupling the machine
From the working position:
- Lower the tractor three-point linkage to rest the
machine on the ground
- Disconnect the PTO shaft from the tractor.
- Secure PTO shaft into its' support (1).
- Disconnect and store hydraulic hoses on holder (2).
- Disconnect and store 7-pin plug in its holder (2).
- Detach the top link from the machine end.
- Uncouple lower linkage arms.
- Lower the tractor three-point linkage.
The machine is uncoupled.
Check that nobody is within the machine
pivoting area:
- If there is someone, make sure the
person moves away.
Park the machine on an even fairly level
ground.
The machine is parked when the 2 half-
harrows rest on the ground.
Even when coupled, put the machine in
working position for long parking periods.
When track eradicators are fitted on the
machine, they must be raised before parking
the machine.
Raise front share before parking the
machine.