9. - Optional equipment
HR4004D-4504D
83
KN208JGB_C
Power harrow
9.5.2 Adjustments in working position
Lateral adjustment
- Loosen U-bolts (1).
- Track eradicators must be mounted centrally to the
tractor wheels.
- Tighten U-bolts (1):
• Torque: 21 daNm (155 lbf ft).
- Fit additional track eradicators when using wide
tyres or dual wheels.
2 track eradicators with traction bolt overload
mechanism.
2 track eradicators with spring overload
mechanism.
- If the distance between track eradicators
and tyres is too small, fit lower links in
forward position.
- See section:
• Putting into service / Coupling and
uncoupling / Preparing the machine /
Positioning of lower coupling yokes.
Working depth adjustment
- Adjust the track eradicator working depth using pin
(2).
The working depth of the track eradicators must
not exceed 100 mm (4’’).
1
1
2
