8. - Instructions for work
GMD24-GMD28 / HD
51
KN226BGB_A
Disc mower
- Pull handle (1) to unlock front guard.
- Lower and lock front guard.
The machine is in working position.
8.2
Adjustments in working position
8.2.1 Cutting height
The desired cutting height is obtained directly by
adjusting the top link length. This height is
adjustable between 30 and 80 mm (1.1’’ - 3.1’’)
depending on the tractors.
To obtain a different cutting height:
- Place the machine in working position.
- Lower the machine on the ground to remove
weight from the top link.
- Modify the top link length to alter the machine tilt
angle.
During work, only use the tractor lift linkage
to place the machine in headland turn
position.
1
