KUHN GF7702T, Operator'S Manual

Page: 41 / 72

Instructions for work
Gyrotedder
GF7702T
39
$ Instructions for work
1. Putting the machine into work
position
From the transport position:
- Pull cord linked to the hydraulic valve (1).
- Shift the transport/work cylinder control valve in the
work position direction until the central rotor wheels
slightly touch the ground:
• The machine is lowered on the ground (a) and tips
rearwards (b).
- Release cord.
Before placing the machine in working
position:
- Check that nobody is within the machine
pivoting area.
- If there is someone, make sure the
person moves away.