KUHN GA4121GM, Operator'S Manual

Page: 63 / 88

9. - Optional equipment
GA4121GM
61
KN129DGB D
Gyrorake
9.8.2 Fitting
- Fit the two supports (1) of reflective panels (2) on
hinges (3) using 4 screws (4), 4 washers (5) and
4 nuts (6).
- Fit reflective panels (2) on supports (1) using
6 screws (7) and 6 nuts (8).
- Fit rear right signalling light to the rear side of the
right reflective panel.
The rear right signalling light black connector is
marked "R".
- Fit rear left signalling light to the rear side of the left
reflective panel.
The rear left signalling light white connector is
marked "L".
- Fit wiring harness on machine using 3 self-
adhering collars and 7 clamp collars.
9.8.3 Electrical connection
- Connect 7-pin plug to the tractor.
Respect stripe direction of signalling panels.
The tractor must be fitted with the following
component:
• An electric 7-pin plug for the signalling
equipment.
1
3
6
5
4
2
7
8