KUHN FC703, Operator'S Manual

Page: 31 / 100

Putting into service
Mower conditioner
FC703 RA*
29
„
Preparing the tractor
-
The tractor PTO stub must rotate at a speed of 1000 min
-1
.
Hitch pin parallelism.
Adjust tractor lift rods so that hitch pins are parallel to the
ground.
The tractor must used with reverse drive mode.
Check that the tractor's authorized gross
weight as well as its lift capacity and
maximum weight per axle are not surpassed.
The front axle load (1) must never, under any
circumstances, be less than 20% of the
tractor's unladen weight. Add ballast weights
to the front in order to preserve the steering
and braking efficiency.
The tractor must be fitted with lower link
stabilizers.