Putting into service
Mower conditioner
FC283 R
27
Coupling the machine
Lower the tractor three-point linkage.
Adjust levelling rods to position draft arms as close as
possible below the hitch pins (A = 30-50 mm (1-
2’’) maximum).
Lift the tractor lift linkage to connect the draft arms to the
hitch pins.
Rest the machine on its parking stand.
Attach top link:
- To lower holes on tractor side.
- To upper holes on machine side.
- Lift the machine using the tractor lift linkage until the
parking stand no longer rests on the ground.
- Remove locking pin (2).
- Fold parking stands (1) upwards and lock it in place.
This procedure provides maximum machine
clearance in transport position.
This top link position provides good machine
ground clearance in transport position.
