EL162
54
7. - Instructions for transport
KN146AGB_L
Cultiplow
7. Instructions for transport
7.1
Putting the machine into
transport position
From the working position:
If the machine is fitted with front wheels
combined to a roller or rear wheels:
- Attach top link to round hole (1) of the machine top
hitch pin.
- The transport position is obtained by raising the
tractor's three-point linkage.
Before placing the machine into transport
position:
- Wait until the rotating parts have come to a
complete stop.
- Check that nobody is within the machine
pivoting area.
When optional equipment is used, follow
specific procedures mentioned in the related
section:
•
Optional equipment / Hydraulic lift
linkage / Putting the machine into
transport position.
• Optional equipment / Rear attachment
with double acting hydraulic lift / Putting
the machine into transport position.
It is forbidden to use the oblong hole for
transport.
1
Summary of Contents for EL162
Page 2: ......
