KUHN AXIS 20.1, Operator'S Manual

Page: 183 / 216

Maintenance and repair
171
C
AXIS
20.1
AXIS
20.1
AXIS
30.1 (W), AXIS 40.1 (W)
AXIS 50.1 W
C.6 Fertiliser drop point
Changing the drop point sets the working width and adjusts it for various types of
fertilisers.
Check the setting of the drop point at the start of every season and also during
the season if uneven spreading is noticed.
Figure 21: Checking the fertiliser drop point
[1] Left/right adjustment centre
[2] Left/right outer yoke
[3] Left/right inner yoke
[4] Actuator
[5] Setting unit
[6] Actuating arm
n
WARNING
Danger of crushing and shearing!
There is a risk of crushing and shearing when working on power-
operated components (actuators, linkages).
 Turn off tractor. Remove the ignition key.
NOTICE
The fertiliser drop point must be set to the same position on both sides of the
machine. Always check both sides.
6