KUHN AXIS 20.1, Operator'S Manual

Page: 179 / 216

Maintenance and repair
167
C
AXIS
20.1
AXIS
20.1
AXIS
30.1 (W), AXIS 40.1 (W)
AXIS 50.1 W
C.3 Weight spreader lubrication
Figure 15: Weight spreader lubrication point
[1] Lubrication point (2x)
[2] Dirt deflector at the front in direction of travel
[3] Lower coupling point for weight spreader
C.4 Check the bolted connections in the weighing cell
The solid fertiliser broadcaster comes with 2 weighing cells, which are mounted
with 2 bolted connections per cell. The tie rod has one bolted connection.
Check the bolted connections of the weighing cells and tie rod on both sides of
the solid fertiliser broadcasters before each spreading season, and if necessary
during the season, to make certain all connections are tight.
Check:
1
3
2
1. Tighten the bolted connec-
tion with a torque wrench
(torque =
300 Nm ).
Figure 16: Fasten the weighing cell (on the
left of the direction of travel)