5
When Hang the fixture, please must verify that the facilities to be able to
withstand the weight of the lamps at least 10 times more.
Please make sure the Mounting hardware is strong enough no any damage, and
insurance for the safety rope as auxiliary security fixed in other facilities will need to
verify before installation. Installing or removing the equipment, to make the pulley
below the work location
1.4.
UV protection and the bulb explosion
Prohibit straight viewpoint with exposed bulbs to avoid UV damage to the eyes;
Do not use the equipment without the lens screen and the lid;
The lens and the light head covers should be timely replaced if any damage to
rupture
The Fixture should be used with the protection screen together.
1.5.
Prevention of electric shock
The electrical connection must only be carried out with corresponding qualifications;
Before installing, make sure you use the power voltage lamps must comply with the identified
power, voltage and have an overload or leakage protection;
Each lamp must be properly grounded, installed in accordance with the relevant standards;
Cut off the power when stall or replace the lamp and the fuse;
Prohibit the use of a lightning storm or wet environment.
1.6.
To prevent burning or fire
•
The fixture can be
mounted directly on the surface of ordinary combustible material.
•
Do not short-circuit temperature protection switch or fuse, use the specified type of fuse.
•
The equipment must be installed away from inflammable and explosive materials.
•
The equipment should be projected range of 3 meters away objects and projectiles
temperature less than 60 °
C;
•
Fan or ventilation, at least in the range of 0.5 meters cannot be an obstacle.
•
Do not place any object on the lens.
•
Handling at least allow the device to cool for 20 minutes.
•
Do not replace the non-original parts.
2.
Package
2.1.
Attachment
HOT MIX 15R
packed with fly-case of one in one, two in one, or carton box.
Attach follow accessory.
CONTENT
QUANTITY
USER MANUL
1 piece
