5
Signal input:
100m Ethernet interface, can be used with both ARTNET signal and DMX signal (the
initial interface displays ">" when there is a signal in ARTNET mode, and flashes if
there is no signal. In SD card mode, the file name and playback speed currently played
are displayed)
Signal output:
4 core Canon head interface:
Pin1:GND
Pin2:B
Pin3:A/DAT
Pin4:VCC
Can be cascade use, can be cascade up to 64 sets.
4.
Product advantages
：
1.
Ethernet port can input ARTNET signal and DMX signal at the same time
。
2.
The recording effect can be used offline. Up to 31 effects can be recorded
。
3.
Playback effect, playback speed, brightness, R, G, B mask, stroboscopic and
recording can be recorded
through the 8 channel controllers of the DMX console
。
4.
DMX address can be set, one controller occupies 8 DMX channels
5.
Can be set to control the IC model,
CL05,DMX512,WS2811,UCS1903,GS8208,UCS9812
6.
Single port output, three channels can be set output 170 Pixel, 340 Pixel, 510 Pixel,
680 Pixel.
Four-channel maximum output 512Pixel
7.
Can set one lamp one pixel point, two lights one pixel point, three lights one pixel
point, four lights
one pixel point.
8.
The output channel can be set: RGB,RBG,GRB,GBR,BRG,BGR,RGBW.
5.
Artnet Controller usage:
5.1.
Display screen display after connecting power supply
•
The first column shows the indication signal, the signal moves ">" when the signal
is normal, and the NO Signal flashes when the signal is abnormal.
