1) If you press the B key, B key indicator, the motor is the most low start, and
the default time of 15 minutes, stop the clock display flashes can change to
stop the clock time sliding touch D and C display ( display every five minutes),
after 3 seconds, the the B key indicator flashes, most low-grade to enter the
timing the motor stops running, sliding touch D to change the motor stalls and
C display, full The grid for stir gear, when the motor running in the a stir gear,
C the last two frames on the display flashes.
2) If you press the E key, the motor is the most low start sliding touch D to
change the motor stalls, and C on the display shows the full grid stir files,
when the motor is running in the file of the stir, C the last two frames on the
display flashes.
(Note: This product is the default the stir files can only run 150 seconds, after
running automatically downshift.)
When the motor is running, press the B button, B button indicator lights and C
screen starts flashing, you can change to stop the clock time sliding touch D
and C display (display every five minutes), 3 seconds after, B indicator flashes,
the motor into the timing to stop running; To cancel this function, press the B
button again.
3) when the F key is pressed, the indicator light lighting lights; then press the F
key, lighting the lamp.
If you purchased a range hood with automatic function, please read the follow-
ing instructions:
When the products enter standby or run in any one stall, 3 seconds long press
the E key, the E key indicator starts blinking fast, the motor will stop rotating
and 60 seconds environmental detection, 60 seconds later, E key indicator
flashes quickly into a slow-flashing stage, the automatic function is turned on.
When the air in the gas concentration reaches a certain level or the tempera-
ture suddenly increased, the motor automatically turns on, the motor running
stalls to the concentration and temperature of the gas in the air, to drop back
to normal as the gas concentration and temperature of the air, followed by
motor down file work until the range hood is automatically turned off.
Troubleshooting
Care and maintenance
13
12
In automatic mode, such as to cancel three seconds long press the E key, the
light stops blinking, or simply press the A key shutdown.
Second, the warning:
In some cases, electrical appliances may be very dangerous.
A) when the range hood is running, do not check the filter.
B) used for a long time, do not touch the bulb and its nearby area.
C) in the hood under the non-direct open flame.
D) Do not use a free flame, because he may damage the filter and may cause
a fire.
E) frequently viewed fried pot to avoid the oil temperature overheating caused
fire.
F) for repair before you unplug the power outlet.
G) This appliance prohibits children or physically weak people use
H) shall supervise the children, to ensure that it is not playing next to the appli-
ance.
I) When the use of range hoods and burning gas or other fuel-efficient stoves,
ventilate the room well.
J) to clean the appliance, it is best to wear protective gloves, hood edge may
be sharp.
K) in hood underneath allows the use of six stove
L) baking range hood prohibited fire directly.
M) if the power cord is damaged, only replace the power cord with the compa-
ny's dedicated.
N) non-removable native non-professionals.
O) there is the risk of fire if not cleaned according to the instructions prescribed
method, range hood.
The statement of the manufacturer refused to accept any responsibility for any
consequences caused by the violation of the above operating procedures.
Care and maintenance
● We recommend that you first commissioning before cooking appliances for
about 15 minutes to completely eliminate water vapor and odors.
● regularly with a damp cloth dipped in industrial alcohol or detergent to wash
the filter and other hood surface.
Suggestion: use the range hood, wipe the surface of the range hood once.
Every three days and clean range hood air inlet filter.
Every twelve months cleaning impeller (This only professionals cleaning)
● When integrated oil in the oil cup is more than two-thirds (highest
Does not exceed the level warning lines) with both hands out level
Gently pull the oil cup, tossed away the waste oil, such as the right.
(Non-demolition process of the range hood or stove use too much force to pre-
vent demolition, in order to avoid to plot oil spills the countertops of pollution or
accidents)
● The lamp apparatus is designed for cooking, instead designed for ambient
lighting. Over prolonged use lighting will shorten its life.
Fault
Reason for this failure may arise
Workaround
Range hood does
not work
No power
Check that the plug is
plugged in
Check that the switch is
turned on
The motor is
running but no air
A duct or a wind shield clogging
Contact technical staff
Stop working after
a few minutes the
motor running
The high temperature safety device
to start
Kitchen ventilation is
not good enough
Range hood installation from the
kitchen stove too close
Range hood at least
65cm distance away
from the kitchen
surfaces
Suction is not
strong
Range hood and kitchen surfaces
are too far away or the wind pipe
is too long
The reinstall Hood
(Contact technical staff)
rease dripping on
the surface of the
stove
Range hood tilt
The reinstall Hood
(Contact technical staff)
Strange sounds The fan blades come into contact
with an unknown object
Contact technical staff
